1. A short circuit (sometimes abbreviated to short or s/c) allows a charge to flow along a different path from the one intended. The electrical opposite of a short circuit is an open circuit, which is infinite resistance between two nodes. It is common to misuse "short circuit" to describe any electrical malfunction, regardless of the actual problem.
A short circuit is an accidental low-resistance connection between two nodes of an electrical circuit that are meant to be at different voltages. This results in an excessive electric current limited only by the Thevenin equivalent resistance of the rest of the network and potentially causes circuit damage, overheating, fire or explosion. Although usually the result of a fault, there are cases where short circuits are caused intentionally, for example, for the purpose of voltage-sensing crowbar circuit protectors.

2.A FUSE short for 'fusible link', is a type of overcurrent protection device. Its essential component is a metal wire or strip that melts when too much current flows. When the metal strip melts, it opens the circuit of which it's a part, and so protects the circuit from excessive current.When the fuse element blows, the indicating pin extends to activate the micro switch or relay which in turn triggers an event.

3.The circuit breaker is a simple solution to a potentially deadly problem. See more circuit breaker pictures.The circuit breaker is an absolutely essential device in the modern world, and one of the most important safety mechanisms in your home. Whenever electrical wiring in a building has too much current flowing through it, these simple machines cut the power until somebody can fix the problem. Without circuit breakers (or the alternative, fuses), household electricity would be impractical because of the potential for fires and other mayhem resulting from simple wiring problems and equipment failures.

4.An electrical overload is a situation where the wiring to or within a machine or system is subjected to a greater electric current load than it was designed to carry, leading to excessive heating of the wires and a possibility of fire. This excessive current load can be a result of electrical insulation failure ( a short circuit) or human error. A correctly designed electrical system incorporates suitable overload protection devices to prevent damage should such a situation occur. Fuses and circuit breakers are most commonly employed for this purpose.

5.This excessive current load can be a result of electrical insulation failure ( a short circuit) or human error. A correctly designed electrical system incorporates suitable overload protection devices to prevent damage should such a situation occur. Fuses and circuit breakers are most commonly employed for this purpose.

6.A short circuit is an accidental low-resistance connection between two nodes of an electrical circuit that are meant to be at different voltages. This results in an excessive electric current limited only by the Thevenin equivalent resistance of the rest of the network and potentially causes circuit damage, overheating, fire or explosion.In an electrical overload, it leads to excessive heating of the wires and a possibility of fire.